logoanim.gif (214355 bytes)

 

 

 

Home
Up

 

 

PoolSpa.jpg (82614 bytes)

Multi-Step Control Module

FiberSwitch Technologies offers two types of Multi-Step Control Modules, ideal for controlling multiple functions on spas and pools, from a single Membrane Switch mounted at or on the spa or pool.

Both modules feature a 24 hour time clock, to turn on a pump at predetermined intervals for daily filtration and/or heating. The modules can operate either a single speed pump or a two speed pump.
Neutral required. 
MULTI-STEP CONTROL MODULES / U.L. APPROVED FOR OUTDOOR USE

The Two-Step Control Module (M852) provides the following sequencing:
Equipment

Two-Step Sequence

1

2
Single Speed Pump
Pump ON/OFF from clock
Pump ON
Two Speed Pump
Low Speed Pump ON/OFF from clock
High Speed Pump ON

The Four-Step Control Module (M854) provides the following sequencing:

Equipment

Four-Step Sequence
1 2 3 4
Single Speed Pump and Blower
Pump ON/OFF from clock
Blower OFF
Pump ON
Blower OFF
Pump ON
Blower ON
Pump OFF
Blower ON
Two Speed Pump and Blower
Low Speed Pump ON/OFF from clock
Blower OFF
High Speed Pump ON
Blower OFF
High-Speed Pump ON
Blower ON
Pump OFF
Blower ON

Exclusively with FiberSwitch we offer a 10 or 30 minute automatic time OFF.  This feature is available with each module.  With this option, the unit returns automatically to sequence step 1 from any other step. The units can operate at either 120 VAC or 240 VAC, and are rated 20 amps resistive with 1 Hp at 120 VAC, or 2 Hp at 240 VAC.

 

[ Home ] [ Up ]

© 2001 FIBERSWITCH TECHNOLOGIES   1739 West Main, Rapid City SD 57702 USA    800-811-9370